65L DigiBoil Pro Sight Glass Distillation / Steam Condenser Lid

คุณสมบัติสินค้า:

Designed to be extremely sturdy when using heavier stills or off-center steam condenser units.

Share

65L Pro Sight Glass Distillation / Steam Condenser Lid

Suits 65L Gen 4 and Gen 3 BrewZillas, 65L Digiboils and older model Robobrews.

Designed to be extremely sturdy when using heavier stills or off-center steam condenser units. Now you can watch your wash boil and see if it's foaming or about to puke. If you are brewing beer indoors you may want to use a steam condenser lid set, without having to take off the entire lid to do hop/salt additions, simply remove the 3" Sight Glass and throw in (take care when hot).

PPSU is an excellent choice for components that are exposed to high temperatures (up to 200°C) and corrosive media due to its exceptional chemical resistance. As well as being extremely impact resistant.
We have decided to use this type of plastic because it also has superior thermal and mechanical properties with the added benefit of being transparent. This will allow us to injection mold intricate parts that would have been near impossible to do in stainless steel or lab-grade glass. Because this is a very unique type of plastic, it comes at a much higher cost per kg than other industrial plastics. So much so that it costs more than stainless steel.

Can be directly used with.
AlcoEngine - Thors Hammerhead Reflux Still - Coming Soon.
AlcoEngine Reflux Still
AlcoEngine Pot Still
and any other still that can be used with a 2 Inch Tri-Clover Port

Do you want to brew indoors but don't want the roof to get all sticky? Try the BrewZilla Steam Condenser Lid.

Specifications
- Thicker Silicone O-Ring for a tighter seal
- 2 Inch Tri-clover Top Ferrule Port
- 3 Inch Sight Glass Ferrule
Includes 3 Inch PPSU Sight Glass Disc, 3 Inch Tri-Clover Clamp and 3 Inch Tri-Clover Silicone Seal.

This unit has been designed to be used with the DigiBoil and BrewZilla 65L. We do not have data on other branded boilers if their clamps are suitable to make a complete seal.

เหมาะกับ 65L Gen 4 และ Gen 3 BrewZillas, 65L Digiboils และ Robobrews รุ่นเก่า

ได้รับการออกแบบมาให้มีความทนทานเป็นพิเศษเมื่อใช้ภาพนิ่งที่หนักกว่าหรือชุดคอนเดนเซอร์ไอน้ำที่อยู่นอกศูนย์กลาง ตอนนี้คุณสามารถดูการซักของคุณเดือดและดูว่ามีฟองหรือกำลังจะอ้วก หากคุณกำลังต้มเบียร์ในอาคาร คุณอาจต้องการใช้ชุดฝาปิดคอนเดนเซอร์ไอน้ำ โดยไม่ต้องถอดฝาออกทั้งหมดเพื่อเติมฮอป/เกลือ เพียงถอดกระจกมองภาพขนาด 3 นิ้วออกแล้วโยนเข้าไป (ระวังเมื่อร้อน)

PPSU เป็นตัวเลือกที่ยอดเยี่ยมสำหรับส่วนประกอบที่ต้องสัมผัสกับอุณหภูมิสูง (สูงถึง 200°C) และตัวกลางที่มีฤทธิ์กัดกร่อน เนื่องจากมีความทนทานต่อสารเคมีเป็นพิเศษ อีกทั้งยังทนทานต่อแรงกระแทกได้เป็นอย่างดี
เราได้ตัดสินใจใช้พลาสติกประเภทนี้เนื่องจากมีคุณสมบัติทางความร้อนและเชิงกลที่เหนือกว่าพร้อมข้อดีเพิ่มเติมคือความโปร่งใส วิธีนี้จะช่วยให้เราสามารถฉีดขึ้นรูปชิ้นส่วนที่ซับซ้อนซึ่งแทบจะไม่สามารถทำได้ในเหล็กกล้าไร้สนิมหรือแก้วเกรดห้องปฏิบัติการ เนื่องจากเป็นพลาสติกประเภทที่ไม่เหมือนใคร จึงมีราคาต่อกก.ที่สูงกว่าพลาสติกอุตสาหกรรมอื่นๆ มาก มากจนมีราคาสูงกว่าเหล็กกล้าไร้สนิม

สามารถใช้กับแผ่นฟองแก้ว Tri-Clover Glass Sight ขนาด 4 นิ้วได้ - เร็วๆ นี้

สามารถใช้ร่วมกับ Tri-Clover Concentric Reducer ขนาด 2" ถึง 4" a:
AlcoEngine - Thors Hammerhead Reflux ยังคง - เร็วๆ นี้
AlcoEngine Reflux ยังคง
AlcoEngine Pot ยังคง
และภาพนิ่งอื่น ๆ ที่สามารถใช้กับพอร์ต Tri-Clover ขนาด 2 นิ้ว

อยากชงในบ้านแต่ไม่ต้องการให้หลังคาเหนียวเหนอะหนะ? ลองใช้ฝาคอนเดนเซอร์ไอน้ำของ BrewZilla กับตัวลดขนาด Tri-Clover Concentric ขนาด 2" ถึง 4"

ข้อมูลจำเพาะ
- โอริงซิลิโคนหนาขึ้นเพื่อการซีลที่แน่นขึ้น
- พอร์ตปลอกโลหะ Tri-clover ขนาด 4 นิ้ว
- ปลอกแก้วสายตา 3 นิ้ว
ประกอบด้วยแผ่นกระจกมองภาพ PPSU ขนาด 3 นิ้ว แคลมป์ Tri-Clover ขนาด 3 นิ้ว และซีลซิลิโคน Tri-Clover ขนาด 3 นิ้ว

Powered by MakeWebEasy.com
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  และ  นโยบายคุกกี้