ข้อต่อ ball lock สำหรับสาย 3 หุน duotight – 9.5mm (3/8”) Female x FFL Female Thread

คุณสมบัติสินค้า:

This straight MFL joiner is suitable for our EVABarrier Beer & Gas hosing in 6mm ID x 9.5mm OD line or most lines with 9.5mm outer diameter. The FFL x 9.5mm duotight is suited to those who prefer to have their gas line a different thickness so that it can be easily identified in a tangled like situation inside a fridge/keezer/kegerator. Looking for high quaility push in fittings that will seal tight? duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings? The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings. This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with our - EVABarrier 6mm ID x 9.5mm OD Not compatible with 4mm ID x 8mm OD line Not compatible with 5mm ID x 8mm OD line No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

Share

Share

This straight MFL joiner is suitable for our EVABarrier Beer & Gas hosing in 6mm ID x 9.5mm OD line or most lines with 9.5mm outer diameter. 

The FFL x 9.5mm duotight is suited to those who prefer to have their gas line a different thickness so that it can be easily identified in a tangled like situation inside a fridge/keezer/kegerator.

Looking for high quaility push in fittings that will seal tight?  duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.

Why do we use Double O-rings?
The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them.  The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings.  This makes our fittings even more reliable and reduces the chance of a leak significantly.

The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues.  This typically can be an issue with other fittings.  This combination of factors makes duotight fittings the most reliable push fit fittings on the market.

Compatible with our 
- EVABarrier 6mm ID x 9.5mm OD 
Not compatible with 4mm ID x 8mm OD line
Not compatible with 5mm ID x 8mm OD line

No clamps necessary! 
We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

 

 

 

 


Powered by MakeWebEasy.com