CO2 Gas Regulator MK4 Dual Gauge Multi Gas - Type 30 พร้อม duotight 9.5 mm.(3หุน)

คุณสมบัติสินค้า:

The MK4 Dual Gauge gas regulator (Type 30 for CO2 / Post Mix Gas) is the only regulator you'll ever need to buy. With a large body and precision diaphragm, this regulator provides high flow rates and very accurate adjustments in both psi and kpa. NOTE: This regulator is sold with the Green 65PSI(4.5BAR) pressure relief valve. If you need the lower 35psi/(2.5BAR) this is part number KL05333 which is sold separately or laternatively if you need the higher 100psi(6.9BAR) pressure relief valve this is part number KL03070 and is also sold separately

Share

แบรนด์ : Kegland

Share

CO2 Gas Regulator MK4 Dual Gauge Multi Gas - Type 30 (includes 8mm x FFL duotight)
This is the regulator with the Type 30 for Carbon Dioxide and also Carbon Dioxide+Nitrogen mixed gasses.  With a large body and precision diaphragm, this regulator provides high flow rates and very accurate adjustments in both psi and kpa.  It's also suitable with the CO2 Gas cylinders that we also sell:

2.6kg CO2 Gas Cylinder
6.0kg CO2 Gas Cylinder

 

duotight 1.10 Design Revision

New and Improved Features
* NEW! duotight 8mm x FFL included as standard - KL06880
* Stronger Steel Gauges made from thicker steel
* Triple scale gauges in kPa, Bar and PSI
* New Colour Coded PRV valves.  This unit comes with a 65psi Green PRV.  It does not come with a Red 35psi or Grey 100psi PRV
As many customers are using pressurisable fermenters such as the KegMenters and Fermentasaurus  units this is an important safety feature to make sure lower pressure relief valves are used for some appilcations.  Also being colour coded it's easy to identify which prv is fitted.
* New Gauge Guard Available (sold separately)
* New M6 Mounting Holes for easy Mounting


This regulator can be used for a wide range of gasses but for other gas types a different Nut and Stem Is required.  Out of the box this regulator will be suitable for Carbon Dioxide (CO2 and CO2+Nitrogen Mixed Gasses).  However if you want to purchase this regulator for other gas types you can interchange the nut and stem with either a Type 10 or Type 50 as as shown below:
Type 10 Nut & Stem :  Helium, Argon, Oxygen
Type 50 Nut & Stem : Nitrogen

 

 

 

 

Powered by MakeWebEasy.com