ข้อต่อสาย 2.5 หุน duotight - 8mm(5/16) x FFL

คุณสมบัติสินค้า:

duotight - 8mm x FFL (to fit MFL Disconnects - 7/16" - 20UNF, 1/4 SAE)

Share

duotight - 8mm x FFL (to fit MFL Disconnects - 7/16" - 20UNF, 1/4 SAE)

This straight joiner is suitable for our EVABarrier Beer & Gas hosing in 4mm ID & 5mm ID line or most lines with  8mm outer diameter. 

duotight 1.10 Design Revision
The thread on this fitting will suit:
MFL Ball Lock and Pin Lock Disconnects
Our MKIII and MK4 Regulators
Many other home brew fittings with MFL Thread

It will not fit the 10mm OD EVABarrier line (with 6mm ID) but we do sell these larger 10mm duotight fittings separately.

No clamps necessary!
We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi

These push in fittings have been engineered for maximised performance in both gas and liquid applications. Compared to other push in fittings on the market, duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port. No other push ins on the market have EPDM o-rings, let alone two! per push in connection.

What is EPDM?
EPDM = Ethylene Propylene Rubber which has excellent chemical resistance including being compatible with ozone, oils, wide variety of alkaline and acid compounds, water, alcohol, ketone and beverages.

EPDM is also resistant to aging, weather and will not perish easily like other rubber compounds.   When compared with silicon and vinyl EPDM has better gas transmission rates, better wear resistance, is BPA free and is the number one choice for many long lasting food grade applications.

Need further instructions?

We have made an instruction sheet to make it really easy for you to determine the sufficient "tightness" when attaching this fitting to a ball lock disconnect or regulator.  For informatoin regarding this please have a look at this PDF here.

duotight - 8mm x FFL (to fit MFL Disconnects - 7/16" - 20UNF, 1/4 SAE)

ข้อต่อแบบตรงนี้เหมาะสำหรับท่อ EVABarrier Beer & Gas - สำหรับสาย ID 4 มม. และ ID 5 มม. หรือสายส่วนใหญ่ที่มีเส้นผ่านศูนย์กลางภายนอก 8 มม.

duotight 1.10 การออกแบบ

ด้านบนข้อต่อนี้จะเหมาะกับ: MFL Ball Lock และ Pin Lock Disconnects กับ MK3 และ MK4 ของเราเป็นอุปกรณ์สำหรับทำเองที่บ้านและอีกมากมายที่มี MFL Thread.

มันจะไม่พอดีกับสาย OD EVABarrier 10 มม. (พร้อม ID 6 มม.) แต่เราขายอุปกรณ์ท่อ 10 มม. ที่ใหญ่กว่าเหล่านี้แยกต่างหาก

 

Powered by MakeWebEasy.com
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  และ  นโยบายคุกกี้