ถังหมักเบียร์และอุปกรณ์เสริม



ที่เบียร์วัสดุเรามี ถังหมักเบียร์ และอุปกรเสิร์มมากมายที่จะช่วยให้คุณสามารถทำเบียร์ที่มีคุณภาพ รสชาติเยี่ยม สำหรับดื่ม และจำหน่ายได้ไม่อั้น

New

ntroducing the Gen3 FermZilla Tr-Conical. Now with 3 Inch Tri-Clover ferrule molded into the tank and redesigned tri-clover dump valve. This unit was born from customer feedback we received on the Gen2 Model. No more complicated dump valve designs here, just simplicity. Brew with confidence on the new Tri-Clover FermZilla Range.

฿ 3,350 ฿ 3,350

(มีหลายคุณสมบัติให้เลือก)

New

This RAPT (พร้อมหัวแปลงเสียบปลั๊กไทยได้ 2 ชิ้น) wifi connected temperature controller box will enable you to monitor, track and control heating and cooling devices remotely through the internet. Set complex temperature profiles so the temperature will automatically change over time.

฿ 2,500 ฿ 2,500

 

New

The new and improved FermZilla 55L brought to you by the critical key minds and engineers behind the original Gen1. But with all the tweaks that make it the most cost effective conical fermenter to date!

฿ 5,450 ฿ 5,450
สินค้าหมด

 

New

ในชุดประกอบด้วย - hop bong 2" - Butterfly Values 2" to 3" - ฝาแบบใหม่สำหรับต่อ butterfly value และ hop bong - Clamp 2" 3 ชิ้น - gasket 2" 3 ชิ้น - Release value 1 ชิ้น (ไม่มี Carbonation Cap ให้)

฿ 1,990 ฿ 1,990

 

New

เลือกสีได้และมีกล่อง The RAPT Pill allows accurate and precise, true real-time specific gravity and temperature logging and control via wifi/bluetooth

 
฿ 1,280 ฿ 1,280

(มีหลายคุณสมบัติให้เลือก)

New

Pills 2 ชิ้น ราคาพิเศษ 2,700 บาท เท่านั้น

฿ 2,700 ฿ 2,700
฿ 2,550 ฿ 2,550 -6%

 

New

If you want an easy way to balance your beer lines this is the way to do it. Please be aware that even in the fully open position these FC disconnects do have some inherent flow resistance so you should use either shorter line or larger ID line that you would when compared with traditional ball lock disconnects. One of the benefits of FC disconnects is you don't need to rely on the small ID or line length to apply flow resistance so it would not make sense to use long lines or small ID lines as well as this is the job of the FC device. This is perfect for people who want to serve a large range of beverages with differing carbonation levels as it gives you the ability to adjust resistance easily. Now with the added benefit of duotight fittings built in. This particular ball lock disconnect has been designed to suit 8mm Beer Line. Due to the integrated duotight fitting the line will simply push directly into this fitting. For this ball lock disconnect we recommend using either: EVABarrier 4mm ID x 8mm OD Line (Best for short draw systems such as our kegerators) or EVABarrier 5mm ID x 8mm ID Line

 
฿ 185 ฿ 185

 

New

duotight - 9.5mm (3/8") Check Valve (Gas) This elbow piece is suitable for our EVABarrier Beer & Gas hosing in 9.5mm (3/8") OD line to 6.5mm (1/4") OD. Due to the fact that this check valve cannot be taken apart to clean, we do not recommend it to be used with liquid. duotight 1.10 Design Revision No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi These push in fittings have been engineered for maximised performance in both gas and liquid applications. Compared to other push in fittings on the market, duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port. No other push ins on the market have EPDM o-rings, let alone two! per push in connection. What is EPDM? EPDM = Ethylene Propylene Rubber which has excellent chemical resistance including being compatible with ozone, oils, wide variety of alkaline and acid compounds, water, alcohol, ketone and beverages. EPDM is also resistant to aging, weather and will not perish easily like other rubber compounds. When compared with silicon and vinyl EPDM has better gas transmission rates, better wear resistance, is BPA free and is the number one choice for many long lasting food grade applications.

 
฿ 100 ฿ 100

 

New

Cornelius Keg Lid Pressure Relief Valve (PRV) A replacement pull-ring style relief valve for your Corny Keg but they are compatible with other products such as the MK4 Regulator and Kegmenter lids. This is the most common relief valve on all ball lock kegs. If you do have a lever tab second hand ball lock keg, you can switch it out with one of these. All of KegLand Brand New Kegs come with a ring pull PRV like this. We supply 3 different pressure relief valve types that differer in opening pressure: RED - 35psi (2.5Bar) GREE - 65psi (4.5Bar) GREY - 100psi (6.9Bar) Max. pressure rating: 35psi NOTE: This is a safety device designed to release pressure at the approximate rated pressure. THIS IS NOT TO BE USED AS SPUNDING VALVE. The pressure rating on these is approximate with tolerance of +/- 10psi. If you need accurate pressure control to hold residual pressure in a pressure fermenter or pressure vessel we would recommend using the BlowTie or alternatively you can get the whole BlowTie Kit.

฿ 100 ฿ 100
New

Cornelius Keg Lid Pressure Relief Valve (PRV) A replacement pull-ring style relief valve for your Corny Keg but they are compatible with other products such as the MK4 Regulator and Kegmenter lids. This is the most common relief valve on all ball lock kegs. If you do have a lever tab second hand ball lock keg, you can switch it out with one of these. All of KegLand Brand New Kegs come with a ring pull PRV like this. We supply 3 different pressure relief valve types that differer in opening pressure: RED - 35psi (2.5Bar) GREE - 65psi (4.5Bar) GREY - 100psi (6.9Bar) Max. pressure rating: 35psi NOTE: This is a safety device designed to release pressure at the approximate rated pressure. THIS IS NOT TO BE USED AS SPUNDING VALVE. The pressure rating on these is approximate with tolerance of +/- 10psi. If you need accurate pressure control to hold residual pressure in a pressure fermenter or pressure vessel we would recommend using the BlowTie or alternatively you can get the whole BlowTie Kit.

฿ 100 ฿ 100
New

Cornelius Keg Lid Pressure Relief Valve (PRV) A replacement pull-ring style relief valve for your Corny Keg but they are compatible with other products such as the MK4 Regulator and Kegmenter lids. This is the most common relief valve on all ball lock kegs. If you do have a lever tab second hand ball lock keg, you can switch it out with one of these. All of KegLand Brand New Kegs come with a ring pull PRV like this. We supply 3 different pressure relief valve types that differer in opening pressure: RED - 35psi (2.5Bar) GREE - 65psi (4.5Bar) GREY - 100psi (6.9Bar) Max. pressure rating: 35psi NOTE: This is a safety device designed to release pressure at the approximate rated pressure. THIS IS NOT TO BE USED AS SPUNDING VALVE. The pressure rating on these is approximate with tolerance of +/- 10psi. If you need accurate pressure control to hold residual pressure in a pressure fermenter or pressure vessel we would recommend using the BlowTie or alternatively you can get the whole BlowTie Kit.

฿ 100 ฿ 100
New

Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings? The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings. This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with our - EVABarrier 6.5mm (1/4") ID x 9.5mm (3/8") OD Line We do not stock any 6.5mm OD line No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

฿ 60 ฿ 60
สินค้าหมด
New

Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings? The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings. This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with our - EVABarrier 6.5mm (1/4") ID x 9.5mm (3/8") OD Line We do not stock any 6.5mm OD line No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

฿ 80 ฿ 80
Best Seller

Replacement Silicone Dip Tube Hose for Mini Keg Tapping Head (54cm) This is a replacement silicone dip tube for the entire KegLand Mini Keg Range. Fits 10L without the need to trim the hose. For all other size minikegs, you will need to trim to the line. สายซิลิโคนอย่างดีสำหรับ Mini Keg หรือถังหมัก Fermzilla ขนาด 27 และ 30 ลิตร 54cm Long 5.5mm ID x 9.6mm OD

฿ 60 ฿ 60
New

แคปซูล RAPT สีเหลือง และ ตัวควบคุมอุณหภูมิตู้เย็น

฿ 2,400 ฿ 2,400
New

ตัวเรือนแบบใส พร้อมยางโอริง ซิลิโคน

฿ 125 ฿ 125
New

ตัวเรือนสีฟ้า ช่วยให้คุณปรับแต่งและแยกความแตกต่างของ RAPT Pills ออกจากกันได้อย่างง่ายดาย *ไม่รวม Pill Housing โอริงคู่ หรือแผงวงจร

฿ 90 ฿ 90

 

New

ตัวเรือนสีแดง ช่วยให้คุณปรับแต่งและแยกความแตกต่างของ RAPT Pills ออกจากกันได้อย่างง่ายดาย *ไม่รวม Pill Housing โอริงคู่ หรือแผงวงจร

฿ 90 ฿ 90
สินค้าหมด

 

New

ตัวเรือนสีเขียว ช่วยให้คุณปรับแต่งและแยกความแตกต่างของ RAPT Pills ออกจากกันได้อย่างง่ายดาย *ไม่รวม Pill Housing โอริงคู่ หรือแผงวงจร

฿ 90 ฿ 90

 

New

This fermentation chamber has been designed to heat and cool your entire fermenter. This is the ideal scenario as the whole fermentation vessel is placed in a temperature controlled environment which gives you the most even temperature and most precise control of your fermenter. From -2°C up to 50°C all at the touch of your fingertips! The control panel comes complete with an integrated colour TFT screen, Spunding Valve and CO2 gas integration. Example combination Inline Regulator with an integrated gauge and a Gauge integrated BlowTie unit to the other side to regulate residual pressure in your fermenter. The 4 button colour display conveniently shows a log of historic temperature graphs, allows you to start, set/stop temperature profiles and gives you access to other critical information for that particular fermentation. For more accurate readings of the core temperature of your fermenter. We highly recommend using a thermowell like our 60cm duotight thermowell with the 2m probe extension for the RAPT Fermentation Chamber.

฿ 27,800 ฿ 27,800

(มีหลายคุณสมบัติให้เลือก)

New

Worlds most compact digital mini gauge with back light display. This accurate and robust gauge fits into a small form factory making it idea for mini keg systems, regulators and other pressure applications.

฿ 350 ฿ 350
New

1 เมตร - 8mm(5/16) high quality beer line will keep your previous beverage in it's best possible conditoin in the process. This 5mm size is the one of the most common sizes for kegerator setups. When using this 5mm ID size you will need to use about 3-4 meters of beer line to get adequate flow resistance between your keg and tap for most kegerator setups. Pressure Rating (with 1.5safety factor) 30C - 1.4 MPa (200psi) 50C - 0.7MPa (100psi)

฿ 40 ฿ 40
New

1 เมตร - 9.5mm(3/8) ผนังคู่ EVA (1) สายเบียร์/แก๊ส คุณภาพสูงสายเบียร์ของคุณก่อนหน้าเครื่องดื่ม It's ที่ดีที่สุด conditoin ในกระบวนการ 6mm ขนาดขนาดใหญ่ปกติทั้งใช้กับแก๊สหรือยาว keg ระบบ ไม่ได้แนะนำสำหรับโดยตรงวาด kegerators เช่นไม่ใช้อีกมากมายกระแสเงินสดความต้านทาน ถ้าคุณใช้สายเบียร์ของคุณ kegerator คุณจะต้องประมาณ 6-8 เมตรเบียร์สายรับเพียงพอ flow และนี้เหตุผลจะปกติแนะนำขนาดเล็ก 5 มม.หรือ 4 มม.สำหรับ Kegerator การตั้งค่า. Type สายค่อนข้างทั่วไปใช้กับ icebank ระบบหรือ temprite ระบบ It's a very ขนาดทั่วไปสำหรับยาว keg ระบบที่ Lower สายความต้านทานที่พึงประสงค์ ความดัน (1.5 SAFETY Factor) 30C - 1.4 MPA (200psi) 50C - 0.7MPa (100psi) ใหม่นี้ EVA คู่ท่อทำจาก EVA ด้านนอกผนังและภายในที่เป็นกรรมสิทธิ์ Polymer Barrier. ด้านนอก Barrier The ด้านนอก Barrier มีได้อย่างแม่นยำอัดความคลาดเคลื่อนและทำจาก EVA วัสดุ นอกจากนี้ยังมีซีลดีเมื่อใช้ต่างๆ John Guest, DuoTight หรืออื่นๆ PUSH in อุปกรณ์. The ด้านนอก Barrier ช่วยให้ท่อที่ยอดเยี่ยม KINK Resistance ดังนั้นสายสามารถ BEND รอบรัศมีไม่มี kinking. ภายใน Barrier ภายใน Barrier ทำจากที่เป็นกรรมสิทธิ์ Polymer ที่มีที่ยอดเยี่ยมแก๊ส Barrier. The ที่ดีขึ้นอย่างมีนัยสำคัญ Barrier แห่งหมายถึงเบียร์ของคุณดีกว่าป้องกันจากออกซิเจนและมีดีกว่า Barrier TO CO2 loss. ดังนั้นเบียร์ของคุณจะนานขึ้นและไม่หลวมคาร์บอนไดออกไซด์อื่นๆเช่นสายเบียร์ประเภท. บางสายเบียร์ประเภทคุณสังเกตว่าเบียร์นั่งเส้นเริ่ม Taste แบนและ/หรือ oxidised เมื่อนั่งสำหรับ EXTENDED. EVABarrier ท่อคือ signficaintly ดีกว่านี้ Regard และคุณจะสังเกตเห็นอย่างมีนัยสำคัญปรับปรุงความสดชื่นเบียร์ของคุณโดยเฉพาะถ้ามันนั่งเส้น. เนื่องจากความหนาแน่นและ Smooth ธรรมชาติของ EVABarrier ภายใน Barrier ท่อภายในพื้นผิว Super Smooth และเกือบสมบูรณ์ impermiable. นี้ทำให้ยากสำหรับแบคทีเรียและจุลินทรีย์อื่นๆเพื่อยึดติดกับพื้นผิวด้านในของท่อ If You Want TO know Why WE ใช้ EVABarrier เรามีๆนี้วิดีโอด้านล่าง: Https://www.kegland.com.au/evabarrier-6mm-x-10mm-double-wall-eva-12meter-length-in-bag.html

฿ 40 ฿ 40
New

This all new ball lock disconnect sets a new bar! The integrated duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassmble and clean. The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured. This particular ball lock disconnect has been designed to suit 8mm Beer/Gas Line. Due to the integrated duotight fitting the line will simply push directly into this fitting. For this ball lock disconnect we recommend:

฿ 140 ฿ 140
New

This all new ball lock disconnect sets a new bar! The integrated duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassmble and clean. The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured. This particular ball lock disconnect has been designed to suit 8mm Beer/Gas Line. Due to the integrated duotight fitting the line will simply push directly into this fitting. For this ball lock disconnect we recommend:

 
฿ 140 ฿ 140
New

What's included: 1. 30L FermZilla Flat Bottom Fermenter with 24mm Hole Drilled for Tap 2. New Ergonomic Silicone Grommet Integrated FermZilla Flat Bottom Lid. 3. 20 x 500mL Amber PET Bottles with Tamper Seal Caps for roughly half a standard batch. See extra recommendations below* 4. Air Lock (Three-piece) 5. Hydrometer 6. Digital Temperature Sticker Thermometer 7. Bottling / Sample Spring Loaded Tap 8. Spring Loaded Bottling Wand 9. KegLand Beverage Tag 10. 4 x sachets of StellarClean PET Cleaning Powder

฿ 1,990 ฿ 1,990
฿ 1,900 ฿ 1,900 -5%
New

This all new ball lock disconnect sets a new bar! The integrated duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassmble and clean. The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured. This particular ball lock disconnect has been designed to suit 8mm Beer/Gas Line. Due to the integrated duotight fitting the line will simply push directly into this fitting. For this ball lock disconnect we recommend: EVABarrier 4mm ID x 8mm OD Line (Best for short draw systems such as our kegerators) or EVABarrier 5mm ID x 8mm ID Line

 
฿ 140 ฿ 140
New

This all new ball lock disconnect sets a new bar! The integrated duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassmble and clean. The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured. This particular ball lock disconnect has been designed to suit 8mm Beer/Gas Line. Due to the integrated duotight fitting the line will simply push directly into this fitting. For this ball lock disconnect we recommend: EVABarrier 4mm ID x 8mm OD Line (Best for short draw systems such as our kegerators) or EVABarrier 5mm ID x 8mm ID Line

 
฿ 140 ฿ 140
New

This flow stopper includes: duotight 8mm x 5/8 push in fittings, ball float,stainless spring,straight 8mm joiners,acrylic sight glass (with 5/8 male)

฿ 350 ฿ 350
New

Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings? The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings. This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with our - EVABarrier 6.5mm (1/4") ID x 9.5mm (3/8") OD Line We do not stock any 6.5mm OD line No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

฿ 90 ฿ 90
Powered by MakeWebEasy.com
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  และ  นโยบายคุกกี้