ถัง Co2, Regulator

Lorem ipsum dolor sit amet, pri et feugiat consulatu. Eu per ceteros platonem. Ea dictas legendos ius. At adhuc solum has. Nec at harum euripidis, habeo elitr patrioque ne mel. Mei probo oportere posidonium in, has ei everti volutpat consequat.

New

This high quality beer line will keep your previous beverage in it's best possible conditoin in the process. This 5mm size is the one of the most common sizes for kegerator setups. When using this 5mm ID size you will need to use about 3-4 meters of beer line to get adequate flow resistance between your keg and tap for most kegerator setups. Pressure Rating (with 1.5safety factor) 30C - 1.4 MPa (200psi) 50C - 0.7MPa (100psi)

฿ 400 ฿ 400
New

These compact inline regulators have been designed to suit 8mm (5/16") Evabarrier Tubing. For higher pressures such as mains water supply we recommend the 4mm ID Tubing here or 5mm ID here if you do not need as high pressures and you would prefer higher flow rate. Suits pressures 0-150psi however this unit is packed with the 0-60psi gauge as standard. Suitable for mains water pressure Suitable for liquid or gas Made from Acetal/POM, EPDM o-rings and stainless teeth Suits 8mm (5/16) OD Tubing such as our Evabarrier Tubing Includes integrated 0-60psi Pressure Gauge If you are looking for a compact digital gauge with backlight illumination click here.

฿ 390 ฿ 390
New

The MK4 Dual Gauge gas regulator (Type 30 for CO2 / Post Mix Gas) is the only regulator you'll ever need to buy. With a large body and precision diaphragm, this regulator provides high flow rates and very accurate adjustments in both psi and kpa. NOTE: This regulator is sold with the Green 65PSI(4.5BAR) pressure relief valve. If you need the lower 35psi/(2.5BAR) this is part number KL05333 which is sold separately or laternatively if you need the higher 100psi(6.9BAR) pressure relief valve this is part number KL03070 and is also sold separately

฿ 1,400 ฿ 1,400
New

This handy tool is exactly what you need to fit numerous dispensing applications: 1. Nut behind your taps (27mm Spanner) 2. Ring collar connecting your tap to the shank. 3. Attaching your type 30 Regulator to your CO2 Bottle 4. FFL fitting to tighten/undo an MFL connection. (e.g. Barbed fitting on CO2 Regulator) 5. Last but not least, the handy dandy bottle opener.

฿ 90 ฿ 90
New

Suits both our Mini All In One CO2 charger and our Premium Regulated Charger Kit. As well as Whipped Cream Dispensers for carbonating water ect. Typically you will use about 6g per litre of CO2 for carbonating and/or 6g per liter to dispense.

฿ 45 ฿ 45
New

KegLand charger kits are made from machined anodised aluminium, no cheap plastic here! This Premium Regulated CO2 Charger is the compact solution for portable setups. Simply screw on the MFL threaded disconnect (Stainless Steel Gas MFL will require teflon tape) then using the needle valve adjust how much pressure you need. Our Premium Regulators do not come with CO2 bulbs/cartiges. You will need to purchase these 16g bulbs separately from our website. Alsd widely available at large supermarkets if you're in dire need. Please note* MFL Grey disconnect not included.

฿ 690 ฿ 690
สินค้าหมด
Powered by MakeWebEasy.com