Speed Fit และอุปกรณ์เสริม

Lorem ipsum dolor sit amet, pri et feugiat consulatu. Eu per ceteros platonem. Ea dictas legendos ius. At adhuc solum has. Nec at harum euripidis, habeo elitr patrioque ne mel. Mei probo oportere posidonium in, has ei everti volutpat consequat.

New

This all new ball lock disconnect sets a new bar! The integrated duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassmble and clean. The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured. This particular ball lock disconnect has been designed to suit 8mm Beer/Gas Line. Due to the integrated duotight fitting the line will simply push directly into this fitting. For this ball lock disconnect we recommend: EVABarrier 4mm ID x 8mm OD Line (Best for short draw systems such as our kegerators) or EVABarrier 5mm ID x 8mm ID Line

฿ 140 ฿ 140
New

This all new ball lock disconnect sets a new bar! The integrated duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassmble and clean. The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured. This particular ball lock disconnect has been designed to suit 8mm Beer/Gas Line. Due to the integrated duotight fitting the line will simply push directly into this fitting. For this ball lock disconnect we recommend: EVABarrier 4mm ID x 8mm OD Line (Best for short draw systems such as our kegerators) or EVABarrier 5mm ID x 8mm ID Line

฿ 140 ฿ 140
New

This flow stopper includes: * 2 x duotight 8mm x 5/8 push in fittings * 1 x ball float * 1 x stainless spring * 2 x straight 8mm joiners * 1 x acrylic sight glass (with 5/8 male thread on either side)

฿ 350 ฿ 350
New

Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings? The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings. This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with our - EVABarrier 6.5mm (1/4") ID x 9.5mm (3/8") OD Line We do not stock any 6.5mm OD line No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

฿ 90 ฿ 90
New

Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings? The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings. This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with our: - EVABarrier 8mm (5/16") double walled tubing. No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

฿ 100 ฿ 100
New

KL14441 duotight-9.5mm (3/8)-1/4

฿ 90 ฿ 90
New

This high quality beer line will keep your previous beverage in it's best possible conditoin in the process. This 5mm size is the one of the most common sizes for kegerator setups. When using this 5mm ID size you will need to use about 3-4 meters of beer line to get adequate flow resistance between your keg and tap for most kegerator setups. Pressure Rating (with 1.5safety factor) 30C - 1.4 MPa (200psi) 50C - 0.7MPa (100psi)

฿ 400 ฿ 400
New

These beer and gas line organiser/tidy is the easy way to keep your cellar/kegerator/keg fridge looking organised and neat.

฿ 70 ฿ 70
New

These unique silicone faucet plugs are a universal size so they suit any tap faucet of a diameter 10mm up to 17mm. The plug is an economical solution for controlling fruit flies, yeast, and bacteria build-up when the faucet is not in use. The silicone compound is resistant to caustic and acid-based cleaners as well as high temperature so it is dishwasher safe. Features: - Food grade silicone - Fits all KegLand taps, pluto guns, fermenter taps, and many other tap designs Note: only available in black This item also has a dual use with the BrewZilla Overflow pipe seal for filling the malt pipe with your grain bill.

฿ 60 ฿ 60
New

Looking for high quaility push in fittings that will seal tight? duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings? The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings. This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with our - EVABarrier 6mm ID x 9.5mm OD line - Not compatibleEVABarrier 4mm ID x 8mm OD line - Not compatibleEVABarrier 5mm ID x 8mm OD line No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

฿ 100 ฿ 100
New

Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings? The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings. This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with our - EVABarrier 6.5mm (1/4") ID x 9.5mm (3/8") OD Line We do not stock any 6.5mm OD line No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

฿ 80 ฿ 80
New

- เป้ใส่เค็ก - เบียร์กัน - เจลรักษาความเย็น (ไม่รวมถัง Co2) This fantastic product has been designed by KegLand so you can dispence kegs on the run. Don't bother bringing people to the bar, now you can take the kegs to the people. This awesome keg backpack is the only one of it's type in Australia and it's exclusive to KegLand. Cylinder, keg and regulator sold separately.

฿ 1,750 ฿ 1,750
สินค้าหมด
New

These compact inline regulators have been designed to suit 8mm (5/16") Evabarrier Tubing. For higher pressures such as mains water supply we recommend the 4mm ID Tubing here or 5mm ID here if you do not need as high pressures and you would prefer higher flow rate. Suits pressures 0-150psi however this unit is packed with the 0-60psi gauge as standard. Suitable for mains water pressure Suitable for liquid or gas Made from Acetal/POM, EPDM o-rings and stainless teeth Suits 8mm (5/16) OD Tubing such as our Evabarrier Tubing Includes integrated 0-60psi Pressure Gauge If you are looking for a compact digital gauge with backlight illumination click here.

฿ 390 ฿ 390
New

ชุดถ่ายน้ำเบียร์ ในชุดประกอบด้วย 1. Premium Ball Lock Disconnect MFL (Black/Liquid) (เกลียวนอก) 2 ตัว 2. ข้อต่อ ball lock สำหรับสาย 3 หุน duotight – 9.5mm 2 ตัว 3. สายเบียร์/แก๊ส EVABarrier 6 มม.(15/64) x 9.5mm(3/8) double Wall ยาว 1.5 เมตร

฿ 400 ฿ 400
New

This straight MFL joiner is suitable for our EVABarrier Beer & Gas hosing in 6mm ID x 9.5mm OD line or most lines with 9.5mm outer diameter. The FFL x 9.5mm duotight is suited to those who prefer to have their gas line a different thickness so that it can be easily identified in a tangled like situation inside a fridge/keezer/kegerator. Looking for high quaility push in fittings that will seal tight? duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings? The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings. This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with our - EVABarrier 6mm ID x 9.5mm OD Not compatible with 4mm ID x 8mm OD line Not compatible with 5mm ID x 8mm OD line No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

฿ 80 ฿ 80
New

KL06248 EVABarrier 6 มม.(15/64) x 9.5mm(3/8) ผนังคู่ EVA (12 เมตรความยาวกระเป๋า) สายเบียร์/แก๊ส คุณภาพสูงสายเบียร์ของคุณก่อนหน้าเครื่องดื่ม It's ที่ดีที่สุด conditoin ในกระบวนการ 6mm ขนาดขนาดใหญ่ปกติทั้งใช้กับแก๊สหรือยาว keg ระบบ ไม่ได้แนะนำสำหรับโดยตรงวาด kegerators เช่นไม่ใช้อีกมากมายกระแสเงินสดความต้านทาน ถ้าคุณใช้สายเบียร์ของคุณ kegerator คุณจะต้องประมาณ 6-8 เมตรเบียร์สายรับเพียงพอ flow และนี้เหตุผลจะปกติแนะนำขนาดเล็ก 5 มม.หรือ 4 มม.สำหรับ Kegerator การตั้งค่า. Type สายค่อนข้างทั่วไปใช้กับ icebank ระบบหรือ temprite ระบบ It's a very ขนาดทั่วไปสำหรับยาว keg ระบบที่ Lower สายความต้านทานที่พึงประสงค์ ความดัน (1.5 SAFETY Factor) 30C - 1.4 MPA (200psi) 50C - 0.7MPa (100psi) ใหม่นี้ EVA คู่ท่อทำจาก EVA ด้านนอกผนังและภายในที่เป็นกรรมสิทธิ์ Polymer Barrier. ด้านนอก Barrier The ด้านนอก Barrier มีได้อย่างแม่นยำอัดความคลาดเคลื่อนและทำจาก EVA วัสดุ นอกจากนี้ยังมีซีลดีเมื่อใช้ต่างๆ John Guest, DuoTight หรืออื่นๆ PUSH in อุปกรณ์. The ด้านนอก Barrier ช่วยให้ท่อที่ยอดเยี่ยม KINK Resistance ดังนั้นสายสามารถ BEND รอบรัศมีไม่มี kinking. ภายใน Barrier ภายใน Barrier ทำจากที่เป็นกรรมสิทธิ์ Polymer ที่มีที่ยอดเยี่ยมแก๊ส Barrier. The ที่ดีขึ้นอย่างมีนัยสำคัญ Barrier แห่งหมายถึงเบียร์ของคุณดีกว่าป้องกันจากออกซิเจนและมีดีกว่า Barrier TO CO2 loss. ดังนั้นเบียร์ของคุณจะนานขึ้นและไม่หลวมคาร์บอนไดออกไซด์อื่นๆเช่นสายเบียร์ประเภท. บางสายเบียร์ประเภทคุณสังเกตว่าเบียร์นั่งเส้นเริ่ม Taste แบนและ/หรือ oxidised เมื่อนั่งสำหรับ EXTENDED. EVABarrier ท่อคือ signficaintly ดีกว่านี้ Regard และคุณจะสังเกตเห็นอย่างมีนัยสำคัญปรับปรุงความสดชื่นเบียร์ของคุณโดยเฉพาะถ้ามันนั่งเส้น. เนื่องจากความหนาแน่นและ Smooth ธรรมชาติของ EVABarrier ภายใน Barrier ท่อภายในพื้นผิว Super Smooth และเกือบสมบูรณ์ impermiable. นี้ทำให้ยากสำหรับแบคทีเรียและจุลินทรีย์อื่นๆเพื่อยึดติดกับพื้นผิวด้านในของท่อ If You Want TO know Why WE ใช้ EVABarrier เรามีๆนี้วิดีโอด้านล่าง: Https://www.kegland.com.au/evabarrier-6mm-x-10mm-double-wall-eva-12meter-length-in-bag.html

฿ 400 ฿ 400
New

KegLand would like to introduce The Corny Floater! A modification some of our guys have done with the Carbonating Keg lid to make it suitable for super duper dry hopping. Or a convenient floating dip tube to had fruit puree to a keg that would surely block a standard stiff dip tube. Just like its brother from another mother, the PET plastic beast that we know as FermZilla with the floating dip tube. Now the 19L Kegs have a dedicated piece of equipment to mimick just that. Ideal for you Corny Fermenters out there as well, taking that clearest liquid from the top.

฿ 850 ฿ 850
New

Are you sick of mixing up your FermZilla ports, wish there was a different colour for your liquid line? KegLand now offers the carb cap in Yellow! Liquid Gold is all you need to remember this beauties function. Whack your silicone dip tube to this baby and never risk accidentally attaching your gas line. Note: It is a multi post, so it will take both gas or liquid if you want to change it up. This plastic carbonation cap has been designed to suit soda bottes, coke bottles, and FermZilla lids. If you have a keg system you should have at least a couple of these as they are so useful. NOTE: The duotight fitting shown in the photos does not come included. If you want to attach the duotight fitting on the back of this fitting then you can use the this one that will allow you to attach 8mm OD EVABarrier 4mm or 5mm ID Beer Line. If you want to use the large 6mm ID x 9.5mm OD EVAbarrier line you can use this duotight fitting.

฿ 120 ฿ 120
New

This handy tool is exactly what you need to fit numerous dispensing applications: 1. Nut behind your taps (27mm Spanner) 2. Ring collar connecting your tap to the shank. 3. Attaching your type 30 Regulator to your CO2 Bottle 4. FFL fitting to tighten/undo an MFL connection. (e.g. Barbed fitting on CO2 Regulator) 5. Last but not least, the handy dandy bottle opener.

฿ 90 ฿ 90
New

TUBE CUTTER - PIPE CUTTER - 2 IN 1 FOR EVABARRIER, PEX, HDPE, VINYL TUBING This 2 in 1 tube cutter has two functions. The reverse of the tube cutter has an 8mm jaw that can be used to pull the collet back on the various Duotight fittings that we sell. The tube cutter itself has hardened and extremly sharp blade that makes nice clean and square cuts on tubing. This is also perfect for using with the Duotight fittings. CUTS IN SECONDS: For clean, straight cuts this 2 in 1 cutter is an integral tool in the easy-to-install Duotight Connection System. COMPATIBLE WITH ALL POLY TUBING: For clean, straight cuts, use with 1/4 Inch, 5/16, 3/8 Inch, 6mm-10mm OD Tubing. Compatible with HDPE, PE, PEX, PP NYLON, EVA, and EVABarrier tubing.

฿ 90 ฿ 90
New

duotight - 8mm x FFL (to fit MFL Disconnects - 7/16" - 20UNF, 1/4 SAE) This straight joiner is suitable for our EVABarrier Beer & Gas hosing in 4mm ID & 5mm ID line or most lines with 8mm outer diameter.

฿ 80 ฿ 80

With Integrated Check Valve

฿ 250 ฿ 250

Home Brew Beer Brew Keg Parts

฿ 110 ฿ 110

Home Brew Beer Brew - KL02967

฿ 110 ฿ 110
New
Powered by MakeWebEasy.com