Speed Fit และอุปกรณ์เสริม

Commercial grade compact chilling dispensing solution. The G80 offers high performance for small to medium volume customers. Suits small and medium ba

duotight 8mm Push In Joiner (Double O-Ring)

They also look great! Upgrade your Kegerator Plastic Drip tray with one of these. Dimensions: 17.7mm x 30.5cm x 2cm deep (cut away diameter is 12cm) This is a high quality stainless steel drip tray.

duotight - 6.5mm (1/4") x 9.5mm (3/8") Reducer This reducer is suitable for our EVABarrier Beer & Gas hosing in 9.5mm (3/8") OD line to 6.5mm (1/4") OD Hosing.

Ball Lock Keg Coupler Adatper - KEGLAND Brand Sankey to Ball Lock Quick Disconnect Conversion Kit, Work with Homebrew A D S G Type Keg Coupler

Plastic Carbonation cap (Red) This plastic carbonation cap has been designed to suit soda bottes, coke bottles, and FermZilla lids. If you have a keg system you should have at least a couple of these as they are so useful.

duotight - 8mm (5/16) x One way check valve This very handy fitting could save you your regulator and is a good investment. This particular type of check valve has low opening pressure of only 1psi. This check valve is suitable for clean liquids such as water or for gas. The spring and internal components are made with stainless steel and quality EPDM seals. This fitting is ideally used with EVABarrier 5mm x 8mm or EVABarrier 4mm x 8mm

ชุดถ่ายน้ำเบียร์ ในชุดประกอบด้วย 1. duotight 8 mm (5/16) x Ball Lock Disconnect (Black + Yellow/Liquid) 2 ชิ้น 2. สายเบียร์/แก๊ส EVABarrier 5 มม. x 8 mm(5/16) double Wall ยาว 1.5 เมตร

Stick it on the side of your kegerator, the inside, the door, anywhere convenient. I'd say be careful putting it over family photos

This standard, black plastic hand held picnic tap is the first choice for many BBQs or university parties.

These water-based liquid ink chalk markers are really handy. The fine point makes it suitable for detailed work on beer tap handles.

These beer and gas line organiser/tidy is the easy way to keep your cellar/kegerator/keg fridge looking organised and neat.

Ball Lock Keg Coupler Adatper - KEGLAND Brand Sankey to Ball Lock Quick Disconnect Conversion Kit, Work with Homebrew A D S G Type Keg Coupler

Commonly referred to as the "Slide On Coupler" or "German Slider" now with 8mm duotight push in fittings for a faster simpler connection.

This compact 9.5 mm duotight fitting is perfect for inline prefiltration of water before it enters sensitive equipment

This compact 8 mm duotight fitting is perfect for inline prefiltration of water before it enters sensitive equipment which may be damaged by solids such as solenoid valves. This fitting includes a 304 Stainless Steel 100 Mesh (150 Micron) screen filter which is removable allowing for it to be easily washed and reused.

This pretty handy kit contails all the seals needed for both the satandard Nukatap and the Flow Control Nukataps. The majority of these seals would never normally need to be replaced. But in the event of accidental loss / extreme commercial use, please replace said washers with the addition of food-grade lubricant to ensure their longevity. Please refer to the parts diagram for seal locations: SS Nukatap Parts List Nukatap FC Parts List If you have not changed your seals before, it's a great idea to take a note of which seal goes where as you remove the old ones!

If you want an easy way to balance your beer lines this is the way to do it. Please be aware that even in the fully open position these FC disconnects do have some inherent flow resistance so you should use either shorter line or larger ID line that you would when compared with traditional ball lock disconnects. One of the benefits of FC disconnects is you don't need to rely on the small ID or line length to apply flow resistance so it would not make sense to use long lines or small ID lines as well as this is the job of the FC device. This is perfect for people who want to serve a large range of beverages with differing carbonation levels as it gives you the ability to adjust resistance easily. Now with the added benefit of duotight fittings built in. This particular ball lock disconnect has been designed to suit 8mm Beer Line. Due to the integrated duotight fitting the line will simply push directly into this fitting. For this ball lock disconnect we recommend using either: EVABarrier 4mm ID x 8mm OD Line (Best for short draw systems such as our kegerators) or EVABarrier 5mm ID x 8mm ID Line

How many times have you been asked "What's on this tap?" The tap handle is designed to work with our full lineup of recipe kits. Each recipe sheet has a print out that can be slipped into the handle. Simply print off recipe sheet on your desktop printer and cut the paper out and insert into the tap handle behind the clear lens that comes included. If you are not using one of our recipe kits no problem! Each new tap handle also comes with a removable, erasable chalkboard surface and if you flip it over you have a whiteboard surface. Tap Board Features: Made from robust ABS/PC plastic Includes removable chalkboard and blackboard insert when not using one of our recipe recipe kit Back of tap handle also serves as chalkboard surface Dimensions: 184mm (7.25") H x 57mm (2.25") W x 19mm (0.75") D Fits all standard beer tap handles 3/8" 16TPI UNC If you would like to make your own graphics to print on your desktop printer and install into this tap hadle just click on the template below: Bishop Handle Template.PDF Need Chalk Pens? Chalk pens are the best way to use the blackboard insert that comes included with this tap. The chalk pens can be purchased as a value pack of 12 pens here.

duotight - 9.5mm (3/8") Check Valve (Gas) This elbow piece is suitable for our EVABarrier Beer & Gas hosing in 9.5mm (3/8") OD line to 6.5mm (1/4") OD. Due to the fact that this check valve cannot be taken apart to clean, we do not recommend it to be used with liquid. duotight 1.10 Design Revision No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi These push in fittings have been engineered for maximised performance in both gas and liquid applications. Compared to other push in fittings on the market, duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port. No other push ins on the market have EPDM o-rings, let alone two! per push in connection. What is EPDM? EPDM = Ethylene Propylene Rubber which has excellent chemical resistance including being compatible with ozone, oils, wide variety of alkaline and acid compounds, water, alcohol, ketone and beverages. EPDM is also resistant to aging, weather and will not perish easily like other rubber compounds. When compared with silicon and vinyl EPDM has better gas transmission rates, better wear resistance, is BPA free and is the number one choice for many long lasting food grade applications.

These universal poppets are great because they are compatible with all the pin lock and ball lock posts. Will fit pepsi, firesstone, cornelius, coca cola kegs and many others. Always handy to have a few spares of these lying around. Please note the o-ring is included on part 12 already. A small amount lubrication may be required.

Replacement shuttles for NUKATAP - FC. Spare Part Item Numbers 11 and 12. Please see product photos for highlighted diagram. NukaTap FC - Diagram / Parts List Please note the o-ring is included on part 12 already. A small amount lubrication may be required.

Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings? The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings. This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with our - EVABarrier 6.5mm (1/4") ID x 9.5mm (3/8") OD Line We do not stock any 6.5mm OD line No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings? The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings. This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with our - EVABarrier 6.5mm (1/4") ID x 9.5mm (3/8") OD Line We do not stock any 6.5mm OD line No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

1 เมตร - 8mm(5/16) high quality beer line will keep your previous beverage in it's best possible conditoin in the process. This 5mm size is the one of the most common sizes for kegerator setups. When using this 5mm ID size you will need to use about 3-4 meters of beer line to get adequate flow resistance between your keg and tap for most kegerator setups. Pressure Rating (with 1.5safety factor) 30C - 1.4 MPa (200psi) 50C - 0.7MPa (100psi)

1 เมตร - 9.5mm(3/8) ผนังคู่ EVA (1) สายเบียร์/แก๊ส คุณภาพสูงสายเบียร์ของคุณก่อนหน้าเครื่องดื่ม It's ที่ดีที่สุด conditoin ในกระบวนการ 6mm ขนาดขนาดใหญ่ปกติทั้งใช้กับแก๊สหรือยาว keg ระบบ ไม่ได้แนะนำสำหรับโดยตรงวาด kegerators เช่นไม่ใช้อีกมากมายกระแสเงินสดความต้านทาน ถ้าคุณใช้สายเบียร์ของคุณ kegerator คุณจะต้องประมาณ 6-8 เมตรเบียร์สายรับเพียงพอ flow และนี้เหตุผลจะปกติแนะนำขนาดเล็ก 5 มม.หรือ 4 มม.สำหรับ Kegerator การตั้งค่า. Type สายค่อนข้างทั่วไปใช้กับ icebank ระบบหรือ temprite ระบบ It's a very ขนาดทั่วไปสำหรับยาว keg ระบบที่ Lower สายความต้านทานที่พึงประสงค์ ความดัน (1.5 SAFETY Factor) 30C - 1.4 MPA (200psi) 50C - 0.7MPa (100psi) ใหม่นี้ EVA คู่ท่อทำจาก EVA ด้านนอกผนังและภายในที่เป็นกรรมสิทธิ์ Polymer Barrier. ด้านนอก Barrier The ด้านนอก Barrier มีได้อย่างแม่นยำอัดความคลาดเคลื่อนและทำจาก EVA วัสดุ นอกจากนี้ยังมีซีลดีเมื่อใช้ต่างๆ John Guest, DuoTight หรืออื่นๆ PUSH in อุปกรณ์. The ด้านนอก Barrier ช่วยให้ท่อที่ยอดเยี่ยม KINK Resistance ดังนั้นสายสามารถ BEND รอบรัศมีไม่มี kinking. ภายใน Barrier ภายใน Barrier ทำจากที่เป็นกรรมสิทธิ์ Polymer ที่มีที่ยอดเยี่ยมแก๊ส Barrier. The ที่ดีขึ้นอย่างมีนัยสำคัญ Barrier แห่งหมายถึงเบียร์ของคุณดีกว่าป้องกันจากออกซิเจนและมีดีกว่า Barrier TO CO2 loss. ดังนั้นเบียร์ของคุณจะนานขึ้นและไม่หลวมคาร์บอนไดออกไซด์อื่นๆเช่นสายเบียร์ประเภท. บางสายเบียร์ประเภทคุณสังเกตว่าเบียร์นั่งเส้นเริ่ม Taste แบนและ/หรือ oxidised เมื่อนั่งสำหรับ EXTENDED. EVABarrier ท่อคือ signficaintly ดีกว่านี้ Regard และคุณจะสังเกตเห็นอย่างมีนัยสำคัญปรับปรุงความสดชื่นเบียร์ของคุณโดยเฉพาะถ้ามันนั่งเส้น. เนื่องจากความหนาแน่นและ Smooth ธรรมชาติของ EVABarrier ภายใน Barrier ท่อภายในพื้นผิว Super Smooth และเกือบสมบูรณ์ impermiable. นี้ทำให้ยากสำหรับแบคทีเรียและจุลินทรีย์อื่นๆเพื่อยึดติดกับพื้นผิวด้านในของท่อ If You Want TO know Why WE ใช้ EVABarrier เรามีๆนี้วิดีโอด้านล่าง: Https://www.kegland.com.au/evabarrier-6mm-x-10mm-double-wall-eva-12meter-length-in-bag.html

If you are looking for a way to completely plug the tap and make an airtight seal then you should also look at our silicone faucet, tap plug. Ideally the best cleaning procedure is to give the taps a quick brush with this device, then spray the internal spout with Superkill Ethanol Spray then to fit the silicone faucet, tap plug.

This all new ball lock disconnect sets a new bar! The integrated duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassmble and clean. The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured. This particular ball lock disconnect has been designed to suit 8mm Beer/Gas Line. Due to the integrated duotight fitting the line will simply push directly into this fitting. For this ball lock disconnect we recommend:

This all new ball lock disconnect sets a new bar! The integrated duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassmble and clean. The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured. This particular ball lock disconnect has been designed to suit 8mm Beer/Gas Line. Due to the integrated duotight fitting the line will simply push directly into this fitting. For this ball lock disconnect we recommend:

This all new ball lock disconnect sets a new bar! The integrated duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassmble and clean. The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured. This particular ball lock disconnect has been designed to suit 8mm Beer/Gas Line. Due to the integrated duotight fitting the line will simply push directly into this fitting. For this ball lock disconnect we recommend: EVABarrier 4mm ID x 8mm OD Line (Best for short draw systems such as our kegerators) or EVABarrier 5mm ID x 8mm ID Line