ถังเค็กและอุปกรณ์เสริม

New

KL14441 duotight-9.5mm (3/8)-1/4

฿ 90 ฿ 90
New

This high quality beer line will keep your previous beverage in it's best possible conditoin in the process. This 5mm size is the one of the most common sizes for kegerator setups. When using this 5mm ID size you will need to use about 3-4 meters of beer line to get adequate flow resistance between your keg and tap for most kegerator setups. Pressure Rating (with 1.5safety factor) 30C - 1.4 MPa (200psi) 50C - 0.7MPa (100psi)

฿ 400 ฿ 400
New

These beer and gas line organiser/tidy is the easy way to keep your cellar/kegerator/keg fridge looking organised and neat.

฿ 70 ฿ 70
Best Seller

Kegmaxs 19L Ball Lock

฿ 2,590 ฿ 2,590
สินค้าหมด
New

Specifications - Size: 26cm x 38cm x 2.5cm Thick - 6.5kg Aluminium Casting with large thermal mass - 5 meters OD x 4mm ID diameter per 304 stainless tube - Includes 4 mounting holes if you want to install your plate Performance Charecteristics With 20C ambient beer temp and flow rate through the cold plate of 300ml/10 seconds and 70% coverage of ice in contact with the cold plate you will be able to reduce the temperature of the liquid as it exits the cold plate to below 4C with a single pass through this cold plate. If your beer is warmer than 28C we would recommend either slowing your flow rate through the cold plate or alternatively having the beverage pass through the cold plate twice. The most common way to use this type of cold plate is to stick it into the bottom of an eksy, drill holes through the esky wall and then glue the cold plate to the floor of the esky with some polyurethane sikaflex. If you do that your esky might look something like this: cooler box If you dont want to drill holes in your esky another optoins is to make a cooler box collar like this. One of our customers was kind enough to show us the collar that he made. cold plate magic box temprite cooler cold plate The nice thing about this design is that you dont have to drill holes in the cooler and you can remove the collar and cold plate at a later date.

฿ 3,800 ฿ 3,800
สมาชิก ฿ 3,500 ฿ 3,500 -8%

 

Best Seller

Barworks keg (China)

฿ 2,250 ฿ 2,250
 
สินค้าหมด

 

New

(Stainless Steel)

฿ 1,350 ฿ 1,350
 

(มีหลายคุณสมบัติให้เลือก)

New

The KL01007 model is the top of the range Flow Control (FC) model. It has all the advantages of the traditional Intertap™ design and is made from 304 grade stainless steel. In addition to this, it also had the added advantage of the flow control leaver on the right hand side of the tap. This adjustment gives the operator full control over the flow speed. This makes balancing your beer lines a snap. This type of tap is typically suited to customers who are often switching from one beer style to the next and want maximum flexibility in their draft system. The Intertap™ FC cannot be used with the shank spring so this tap should be manually turned off after use.

฿ 1,250 ฿ 1,250
 

(มีหลายคุณสมบัติให้เลือก)

New

These unique silicone faucet plugs are a universal size so they suit any tap faucet of a diameter 10mm up to 17mm. The plug is an economical solution for controlling fruit flies, yeast, and bacteria build-up when the faucet is not in use. The silicone compound is resistant to caustic and acid-based cleaners as well as high temperature so it is dishwasher safe. Features: - Food grade silicone - Fits all KegLand taps, pluto guns, fermenter taps, and many other tap designs Note: only available in black This item also has a dual use with the BrewZilla Overflow pipe seal for filling the malt pipe with your grain bill.

฿ 60 ฿ 60
New

Looking for high quaility push in fittings that will seal tight? duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings? The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings. This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with our - EVABarrier 6mm ID x 9.5mm OD line - Not compatibleEVABarrier 4mm ID x 8mm OD line - Not compatibleEVABarrier 5mm ID x 8mm OD line No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

฿ 100 ฿ 100
สินค้าหมด
New

Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings? The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings. This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with our - EVABarrier 6.5mm (1/4") ID x 9.5mm (3/8") OD Line We do not stock any 6.5mm OD line No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

฿ 80 ฿ 80
New

Designed to be used with plumbed fonts such as the Cobra Fonts or any 5/8" Female Font that requires a 25mm long shank. Please note they do not come with a Barbtail, Nut & Collar.

฿ 300 ฿ 300
New

stainless steel duotight compatible short shanks are the perfect addition to your black phantom font tower. Couple this with the Black NUKATAP SS Stealth bomber for the ultimate sleek and stealthy draught setup for your kegerator or home bar. duotight short shanks manufactured after March 2021 have a redesigned barb increasing their reliability. duotight barb design update pdf Included duotight for 8mm OD beer line. duotight - 6.5mm (1/4") x 8mm (5/16") Reducer Please check if all items are in stock in the top right hand side of this bundle page. If items are out of stock we suggest looking at the individual items page to determine an ETA date. If there is no date, please send us an email or give us a call.

฿ 350 ฿ 350
New

- เป้ใส่เค็ก - เบียร์กัน - เจลรักษาความเย็น (ไม่รวมถัง Co2) This fantastic product has been designed by KegLand so you can dispence kegs on the run. Don't bother bringing people to the bar, now you can take the kegs to the people. This awesome keg backpack is the only one of it's type in Australia and it's exclusive to KegLand. Cylinder, keg and regulator sold separately.

฿ 1,750 ฿ 1,750
New

These compact inline regulators have been designed to suit 8mm (5/16") Evabarrier Tubing. For higher pressures such as mains water supply we recommend the 4mm ID Tubing here or 5mm ID here if you do not need as high pressures and you would prefer higher flow rate. Suits pressures 0-150psi however this unit is packed with the 0-60psi gauge as standard. Suitable for mains water pressure Suitable for liquid or gas Made from Acetal/POM, EPDM o-rings and stainless teeth Suits 8mm (5/16) OD Tubing such as our Evabarrier Tubing Includes integrated 0-60psi Pressure Gauge If you are looking for a compact digital gauge with backlight illumination click here.

฿ 390 ฿ 390
New

Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings? The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings. This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with our - EVABarrier 6.5mm (1/4") ID x 9.5mm (3/8") OD Line We do not stock any 6.5mm OD line No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

฿ 80 ฿ 80
New

ชุดถ่ายน้ำเบียร์ ในชุดประกอบด้วย 1. Premium Ball Lock Disconnect MFL (Black/Liquid) (เกลียวนอก) 2 ตัว 2. ข้อต่อ ball lock สำหรับสาย 3 หุน duotight – 9.5mm 2 ตัว 3. สายเบียร์/แก๊ส EVABarrier 6 มม.(15/64) x 9.5mm(3/8) double Wall ยาว 1.5 เมตร

฿ 400 ฿ 400
New

This straight MFL joiner is suitable for our EVABarrier Beer & Gas hosing in 6mm ID x 9.5mm OD line or most lines with 9.5mm outer diameter. The FFL x 9.5mm duotight is suited to those who prefer to have their gas line a different thickness so that it can be easily identified in a tangled like situation inside a fridge/keezer/kegerator. Looking for high quaility push in fittings that will seal tight? duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings? The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings. This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with our - EVABarrier 6mm ID x 9.5mm OD Not compatible with 4mm ID x 8mm OD line Not compatible with 5mm ID x 8mm OD line No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

฿ 80 ฿ 80
New

KL06248 EVABarrier 6 มม.(15/64) x 9.5mm(3/8) ผนังคู่ EVA (12 เมตรความยาวกระเป๋า) สายเบียร์/แก๊ส คุณภาพสูงสายเบียร์ของคุณก่อนหน้าเครื่องดื่ม It's ที่ดีที่สุด conditoin ในกระบวนการ 6mm ขนาดขนาดใหญ่ปกติทั้งใช้กับแก๊สหรือยาว keg ระบบ ไม่ได้แนะนำสำหรับโดยตรงวาด kegerators เช่นไม่ใช้อีกมากมายกระแสเงินสดความต้านทาน ถ้าคุณใช้สายเบียร์ของคุณ kegerator คุณจะต้องประมาณ 6-8 เมตรเบียร์สายรับเพียงพอ flow และนี้เหตุผลจะปกติแนะนำขนาดเล็ก 5 มม.หรือ 4 มม.สำหรับ Kegerator การตั้งค่า. Type สายค่อนข้างทั่วไปใช้กับ icebank ระบบหรือ temprite ระบบ It's a very ขนาดทั่วไปสำหรับยาว keg ระบบที่ Lower สายความต้านทานที่พึงประสงค์ ความดัน (1.5 SAFETY Factor) 30C - 1.4 MPA (200psi) 50C - 0.7MPa (100psi) ใหม่นี้ EVA คู่ท่อทำจาก EVA ด้านนอกผนังและภายในที่เป็นกรรมสิทธิ์ Polymer Barrier. ด้านนอก Barrier The ด้านนอก Barrier มีได้อย่างแม่นยำอัดความคลาดเคลื่อนและทำจาก EVA วัสดุ นอกจากนี้ยังมีซีลดีเมื่อใช้ต่างๆ John Guest, DuoTight หรืออื่นๆ PUSH in อุปกรณ์. The ด้านนอก Barrier ช่วยให้ท่อที่ยอดเยี่ยม KINK Resistance ดังนั้นสายสามารถ BEND รอบรัศมีไม่มี kinking. ภายใน Barrier ภายใน Barrier ทำจากที่เป็นกรรมสิทธิ์ Polymer ที่มีที่ยอดเยี่ยมแก๊ส Barrier. The ที่ดีขึ้นอย่างมีนัยสำคัญ Barrier แห่งหมายถึงเบียร์ของคุณดีกว่าป้องกันจากออกซิเจนและมีดีกว่า Barrier TO CO2 loss. ดังนั้นเบียร์ของคุณจะนานขึ้นและไม่หลวมคาร์บอนไดออกไซด์อื่นๆเช่นสายเบียร์ประเภท. บางสายเบียร์ประเภทคุณสังเกตว่าเบียร์นั่งเส้นเริ่ม Taste แบนและ/หรือ oxidised เมื่อนั่งสำหรับ EXTENDED. EVABarrier ท่อคือ signficaintly ดีกว่านี้ Regard และคุณจะสังเกตเห็นอย่างมีนัยสำคัญปรับปรุงความสดชื่นเบียร์ของคุณโดยเฉพาะถ้ามันนั่งเส้น. เนื่องจากความหนาแน่นและ Smooth ธรรมชาติของ EVABarrier ภายใน Barrier ท่อภายในพื้นผิว Super Smooth และเกือบสมบูรณ์ impermiable. นี้ทำให้ยากสำหรับแบคทีเรียและจุลินทรีย์อื่นๆเพื่อยึดติดกับพื้นผิวด้านในของท่อ If You Want TO know Why WE ใช้ EVABarrier เรามีๆนี้วิดีโอด้านล่าง: Https://www.kegland.com.au/evabarrier-6mm-x-10mm-double-wall-eva-12meter-length-in-bag.html

฿ 400 ฿ 400
New

These long shanks are suitable to attach taps to a Jockey Box (esky) or Fridge/Freezer wall. You will need a 22mm Size Holesaw in order to get a snug fit. Also Compatible with: Perlick, Brumby, Micromatic + many more. They come with: - 100mm Stainless 304 NukaTap Shank - duotight 8mm push in to 5/8" female thread - Flat face external washer - Flat Internal washer - Brass Anchor Nut - Ring collar

฿ 590 ฿ 590
New

The MK4 Dual Gauge gas regulator (Type 30 for CO2 / Post Mix Gas) is the only regulator you'll ever need to buy. With a large body and precision diaphragm, this regulator provides high flow rates and very accurate adjustments in both psi and kpa. NOTE: This regulator is sold with the Green 65PSI(4.5BAR) pressure relief valve. If you need the lower 35psi/(2.5BAR) this is part number KL05333 which is sold separately or laternatively if you need the higher 100psi(6.9BAR) pressure relief valve this is part number KL03070 and is also sold separately

฿ 1,400 ฿ 1,400
สินค้าหมด

 

New

This new kegerator model is a big step up from the older Series 4 model. This new Series X has several major advancements: It is 10% more power efficient 15% faster cooling and better cooling in hotter climates Thicker walls for improved insutation FITS 4 CORNY KEGS (purchased separately) This includes: Kegerator Main Body Wire Shelf Black Plastic Wrap Around Drip Tray Castor Wheels CO2 Cylinder Holder (designed to suit 2.6kg gas cylinder) Chrome Plated Guard Rail

฿ 29,500 ฿ 29,500

(มีหลายคุณสมบัติให้เลือก)

With Aluminium Cold Plate

฿ 12,500 ฿ 12,500
สินค้าหมด

(มีหลายคุณสมบัติให้เลือก)

New

KegLand would like to introduce The Corny Floater! A modification some of our guys have done with the Carbonating Keg lid to make it suitable for super duper dry hopping. Or a convenient floating dip tube to had fruit puree to a keg that would surely block a standard stiff dip tube. Just like its brother from another mother, the PET plastic beast that we know as FermZilla with the floating dip tube. Now the 19L Kegs have a dedicated piece of equipment to mimick just that. Ideal for you Corny Fermenters out there as well, taking that clearest liquid from the top.

฿ 850 ฿ 850

 

New

Are you sick of mixing up your FermZilla ports, wish there was a different colour for your liquid line? KegLand now offers the carb cap in Yellow! Liquid Gold is all you need to remember this beauties function. Whack your silicone dip tube to this baby and never risk accidentally attaching your gas line. Note: It is a multi post, so it will take both gas or liquid if you want to change it up. This plastic carbonation cap has been designed to suit soda bottes, coke bottles, and FermZilla lids. If you have a keg system you should have at least a couple of these as they are so useful. NOTE: The duotight fitting shown in the photos does not come included. If you want to attach the duotight fitting on the back of this fitting then you can use the this one that will allow you to attach 8mm OD EVABarrier 4mm or 5mm ID Beer Line. If you want to use the large 6mm ID x 9.5mm OD EVAbarrier line you can use this duotight fitting.

฿ 120 ฿ 120
 
New

This handy tool is exactly what you need to fit numerous dispensing applications: 1. Nut behind your taps (27mm Spanner) 2. Ring collar connecting your tap to the shank. 3. Attaching your type 30 Regulator to your CO2 Bottle 4. FFL fitting to tighten/undo an MFL connection. (e.g. Barbed fitting on CO2 Regulator) 5. Last but not least, the handy dandy bottle opener.

฿ 90 ฿ 90
 
New

TUBE CUTTER - PIPE CUTTER - 2 IN 1 FOR EVABARRIER, PEX, HDPE, VINYL TUBING This 2 in 1 tube cutter has two functions. The reverse of the tube cutter has an 8mm jaw that can be used to pull the collet back on the various Duotight fittings that we sell. The tube cutter itself has hardened and extremly sharp blade that makes nice clean and square cuts on tubing. This is also perfect for using with the Duotight fittings. CUTS IN SECONDS: For clean, straight cuts this 2 in 1 cutter is an integral tool in the easy-to-install Duotight Connection System. COMPATIBLE WITH ALL POLY TUBING: For clean, straight cuts, use with 1/4 Inch, 5/16, 3/8 Inch, 6mm-10mm OD Tubing. Compatible with HDPE, PE, PEX, PP NYLON, EVA, and EVABarrier tubing.

฿ 90 ฿ 90
สมาชิก ฿ 75 ฿ 75 -17%
New

Suits both our Mini All In One CO2 charger and our Premium Regulated Charger Kit. As well as Whipped Cream Dispensers for carbonating water ect. Typically you will use about 6g per litre of CO2 for carbonating and/or 6g per liter to dispense.

฿ 45 ฿ 45
 
New

KegLand charger kits are made from machined anodised aluminium, no cheap plastic here! This Premium Regulated CO2 Charger is the compact solution for portable setups. Simply screw on the MFL threaded disconnect (Stainless Steel Gas MFL will require teflon tape) then using the needle valve adjust how much pressure you need. Our Premium Regulators do not come with CO2 bulbs/cartiges. You will need to purchase these 16g bulbs separately from our website. Alsd widely available at large supermarkets if you're in dire need. Please note* MFL Grey disconnect not included.

฿ 690 ฿ 690
สินค้าหมด
New

duotight - 8mm x FFL (to fit MFL Disconnects - 7/16" - 20UNF, 1/4 SAE) This straight joiner is suitable for our EVABarrier Beer & Gas hosing in 4mm ID & 5mm ID line or most lines with 8mm outer diameter.

฿ 80 ฿ 80
สินค้าหมด
Powered by MakeWebEasy.com